Iai-america PCON-CFA Manual do Utilizador descarregar pdf (Página 18)

3. ACON-C/CG, PCON-C/CG

CC-Link

2) Position/Simplified Direct Value Mode : This is the operation method with the position No. set up.

Whether if setup the target position using a value directly by means

of the change over of the control signal, or using the value

registered on the position data, can be selected.

For “Speed”, “Acceleration/Deceleration” and “Positioning Width”,

use the values already registered on the position data. The settable

No. of position data items is max 768 points.

No. of Occupied Stations: One Station

3) Half Direct Value Mode : This is the operation method with the “Speed”, “Acceleration/Deceleration”,

“Pressing Current Value” set up directly using the numerical values, in addition to

the “Target Position”.

No. of Occupied Stations: Two Stations

Target Position: 100.00 mm

Position No. 0

ACON or PCON

applicable to CC-Link

Actuator

Deceleration

Speed

Acceleration Pressing

ACON or PCON

applicable to CC-Link

Actuator

Target Position: 100.00mm

Positioning Width: 0.10mm

Speed Setup: 100.0mm/s

Acceleration/Deceleration: 0.30G

Pressing Current Value: 50%

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 103 104

Sem comentários

Iai-america PCON-CFA Manual do Utilizador Página 18